How To Use It

Ⅰ. Cleaning the surface - Prepare the target surface to be clean and dry. The smoother the surface, the easier to transfer the vinyl.

Ⅱ. Design using a cutter - Place it on a cutting pad with a sticky back, adjust the ideal size and cut the design through the cutter.

Ⅲ. Remove the work - Remove the letters/graphics that have been cut on the board.

Ⅳ. Paste transfer paper - Gently place the tape on the cut vinyl surface. Use a spatula to ensure that the transfer tape is adhered to the vinyl and tight. Then slowly attach it to a new clean, dry surface

Ⅴ. Remove the transfer paper - Carefully wipe the scotch tape to ensure a firm adhesion to the vinyl.